Rubber and Plastics
No |
Item |
Parameter |
61 |
Adhesive (General Purpose) |
General Requirements, pH, Bond permanency, Brittleness and moisture absorption, Stability |
62 |
Adhesive (PVA Based) |
Total solids, pH value, Monomer content, Consistency, Resistance to mould grout, Solid content Bulk Density, Freedom from staining, Stability at 37 oC, Breaking Load |
63 |
Admixture |
Dry Material Content, Relative Density, Ash content |
64 |
Aerial Bundled Conductors |
Conditioning Tensile Strength & Elongation |
65 |
Binder and Glue |
Glue - Viscosity, Glue –Density Binder - Culture test |
66 |
Carboxyl Methyl Cellulose |
Moisture, Purity, Degree of Substitution pH value, Viscosity |
67 |
Cellular Flexible Materials |
Tensile Strength (Both MD & CD), Tear Strength (Both MD & CD), Water absorption, Moisture Permeability, Puncture Resistance |
68 |
Characterization of polymers |
Material Identification, Ash Content, melt flow index (MFI) |
69 |
Condoms |
as per ISO 4074 |
70 |
Condoms |
To SLS Standard |
71 |
Condoms |
as per ISO |
72 |
Conduits ( Flexible/ Rigid / Plain) |
Dimensions/ Construction/ Markings, Impact test, Resistance to Burning, Bending test, Compression test Collapse test, Resistance to heat, Electrical Installation |
73 |
Electrical Insulation tapes |
Adhesion to Backing, Breaking Strength, Flammability, Adhesion to Steel |
74 |
Electronic Torque Rheometer Extruder and Plan |
Torque Rheometer / First sample Torque Rheometer / additional sample, Torque Rheometer / per month, Torque Rheometer / fixed charge, Extruder / Per hour Extruder / Per month Planetery mixer / per sample Planetery mixer / per month |
75 |
Emulsion and Enamel Paints |
Emulsion Exterior, Emulsion Interior, Enamel Paint, UV Resistance, Additional one sample |
76 |
Emulsion Paints |
Drying time, Viscosity, pH Value, Resistance to wet abrasion, Fineness of grind, Weight / litre, Solids content Ash content, Spreading Capacity Temperature Stability (10 oC & 40 oC), Recoating Properties, Resistance to Alkali |
77 |
Enamel Paints |
Protection against corrosion under conditions of condensation, Resistance to continuous salt spray, Bend test, Scratch Hardness, Brushing Properties Bending Properties, Drying time Flow time, Gloss, Solids, Ash content, Uncombined water, Weight / liter, Scratch resistance, Resistance to water, Flash Point, Temperature Stability (10 oC & 40 oC) |
78 |
Hot melt adhesive |
Melting Point / Softning point |
79 |
Latex Rubber Sheet |
Specific gravity, Hardness Tensile strength and Elongation at break Tension set, Tear strength |
80 |
Latex |
Total Solids content (TSC), Dry Rubber content (DRC), Mechanical Stability Time (MST), Volatile Fatty Acid
Alkalinity, Viscosity, Mg content Dirt content, N2 content, Sludge |
81 |
Latex / Latex Rubber Sheet/ Strapping band |
Total Solids content (TSC), Dry Rubber content, (DRC), Mechanical Stability Time (MST), Volatile Fatty Acid Alkalinity, Viscosity, Mg content Dirt content, N2 content, Sludge, Specific gravity, Hardness Tensile strength and Elongation at break, Tension set, Tear strength, Breaking Load (Tensile strength) |
82 |
Material (polymer) |
Material Identification, Filler Content (Ash) |
83 |
Medium Oil Alkyd Resin based on Soya Bean Oil |
Solid content & Solvent percentage |
84 |
Molded Solid Rubber Pads |
Compression Set, Hardness (Before Aging), Hardness (After ageing), Changes for the ageing oven, Ozone Resistance |
85 |
Polypropylene bags (sacks) |
Material Identification, Construction, Dimensions, Mass of sack, Liner density of tape, Tape width, Seam and stitching, Seam strength, Fabric breaking strength, Bursting strength, Bulk Strength 2 Sacks, Inner liner (Thickness, Length & Width) |
86 |
Polythene bags/ Polythene Sleeving/polymer sheets and films (PE, PP ect.)/ Polythene Pads |
Height, Width, Gussets length and Tearing strength, Gauge, Dimensions, Thickness, Lay flat width, Tensile strength and Elongation-both MD and CD, Material Identification, Moisture, Density, Sealing strength, Impact (dart dead load), Burst Pressure, Water absorption, Chemical resistance, UV Resistance per day, Water vapor permeability (WVP), Flammability |
87 |
PVA Binder (paints) |
Film appearance, Solids, Viscosity, pH value, Monomer |
88 |
PVC Solvent Cement as per SLS 935
|
Bond strength, Shear strength Film properties, Bond strength or lap shear strength, Pressure test, Viscosity, Hydrostatic Burst strength |
89 |
PVC Trucking |
PVC Trucking as per SLS 1206 : 2000, Dimension/Marking/ Construction, Cable supporting test, Resistance to Heat `Resistance to Flame propagation Impact test |
90 |
PVC U Fittings |
Stress Relief Test (as per SLS 659), Hydraulic Characteristics |
91 |
Rail Insulators |
Glass content, Material Identification Specific Gravity, Breaking Load Porosity, Hardness |
92 |
Reclaimed Rubber |
Ash content, Acetone extract Specific Gravity, Hardness Tensile Strength, Elongation at break |
93 |
Resin |
Drying Time |
94 |
Rheometer Curve-Rubber |
Rheometer Properties |
95 |
Rigid Conduits |
Electrical Installation |
96 |
Rubber Cord |
Shore Hardness, Tensile strength and Elongation at break, Polymer analysis |
97 |
Rubber Sealing Rings |
Tensile Strength + Elongation at break |
98 |
Rubber Sealing Rings |
Tensile Strength + Elongation at break, Hardness, Compression set at 70 oC, Water absorption swell, Accelerated aging test |
99 |
Rubber/ Dry Rubber Testing/ Reclaim Rubber/ Rubber Compound |
Rheological Properties, Tensile Strength, Elongation at break, Tear strength, Identification of rubber, Permanent set measurement, To test for skid resistance of tire treads, Determination of relative density & dens, Hardness measurement Tension set at normal or high temperature, Ash content, Acetone extract, Specific Gravity, Aging, Abrasion resistance, Resilience measurement, Scott flexing test, Hysteresis test, Skid resistance of tire treads, Water absorption, Effect of liquids, Tear strength, Compression test, Stress relaxation |
100 |
Safety Film |
Breaking Strength, Tear strength Impact test |
101 |
Sleeping Bags |
Dimensions, Identification of upper surface cloth material, Identification of bottom surface coated material, Identification of thread material |
102 |
Stamp Pad |
General Requirement, Color, Performance, Glycerol content, Color fastness |
103 |
Strapping band |
Breaking Load (Tensile strength) |
104 |
Testing of Nylon Rope |
Linear Density, Ley Length Diameter, Elongation & Breaking Force
|
105 |
Thermoplastics beads - Road Marking |
Binder content, Solid glass beads Softening point, Size distribution of glass beads |
106 |
uPVC (pipe/ Pipe Fittings/ Pipe Joints/Pressure Pipe/ Telecom Pipes/ Water Supply Pipes) |
Tensile properties, Hydrostatic pressure test, Longitudinal reversion test, Appearance /Dimension /Colour Marking (Freedom from defects), Tensile Strength & Elongation, Resistance to Sulfuric Acid Resistance to Acetone, Flattening test, Resistance to impact, Heat Reversion test, Hydrostatic pressure test, Stress relief test, Longitudinal reversion test, Flattening Test, Hydraulic Characteristics, Hardness, test as per SLS standard |
107 |
Varnish Based on Synthetic Resin |
Recoating properties Colour - lovibond Finish, Scratch Hardness, Bending properties, Stripping test, Drying time, Flash point, Volatile matter, Viscosity, Resistance to water, Resistance to acid, Resistance to alkali |
108 |
Varnish Based on Synthetic Resin |
Recoating properties Colour - lovibond Finish, Scratch Hardness, Bending properties, Stripping test,
Drying time, Flash point, Volatile matter, Viscosity, Resistance to water, Resistance to acid, Resistance to alkali |
109 |
Zinc Oxide |
Purity, ZnO + Pb + Cu + Fe + Mn Residue on 45 microns (wet), pH Loss on ignition at 850, Chemical Composition (ZnO, PbO, CaO, Cu and Mn) |
110 |
Zinc Oxide Elastic Adhesive Surgical Tape USP |
Zinc Oxide Elastic Adhesive Tape
|